Stripping pliers is an electrical motor repair, electrical instruments, one of the commonly used tools. It is suitable for the peeling of plastic, rubber insulated wires and cable cores.

The method of use is as follows:

First, the thread to be peeled is placed in the cutting edge of the pliers head, and then the two clamp handle is kneaded by hand, and then loose, and the insulating skin is separated from the core wire.

1. ordinary pliers can not cut the piano wire, unless it has this function.

2. don't put the tongs in the overheated place, otherwise it will cause the annealing and damage the tool.

3. cutting with the correct angle, not tapping the handle and clamp head of pliers, or crimping steel wire with pliers edge.

4. don't use light pincers as hammers, or tap handles. If this is abused, the pliers will crack and break, and the pliers will collapse.

5. don't bend the hard steel wire with light pliers. If the head of the pliers is bent too thick, the pliers will be damaged. Solid tools should be used.

6. do not extend the length of the handle to achieve greater shear force, but should use larger size pliers or wire clippers.

7. pliers can not be used in nuts and screws, wrench effect will be better, and it is not easy to damage the fastener.

8. often lubricate the pliers, add lubricating oil on the hinge to extend the service life, and ensure the use of labor.

Wear goggles to protect your eyes when you cut 9. wires.

10. note caution: the rubber sleeve on the handle is to increase the use of comfort; unless it is a specific insulation handle, these rubber sleeve can not prevent electricity, nor can it be used for live working.